Welcome to bill breaker everybody. Today we have the rare opportunity to show you all of our builds in one place, they're, actually, all in pretty good running condition, so we're gon na give it a shot without further ado, let's see the fleet, so this is almost all of our builds. It's pretty impressive to see them all in one place. So what we're going to do is we're going to pull each one out.

Do a build breakdown kind of give you an overview of what each build is we're going to do some cold starts and then we're going to take them out for a lap. So let's get started yeah, so our first build we're doing. Is the turbo rotary mini bike? So this thing is super unique one of our coolest builds. It has a km48, basically a rotary pressure, washer motor and then we just have a turbo from a little moped, and then we put it on this chrome frame.

So this thing's super fun to drive makes a lot of power. Actually so, let's see if she starts so foreign foreign next up is our atv. This thing is pretty rad. We did a basically full build on this.

It was like a little kids. 110 atv. We put a built tillets on on it, it's featuring a juggernaut from go powersports. This thing is quite the ripper, so looks like we left the fuel on.

So that's ready to go. Let's see if she'll start up, oh man i'll see if we get that. First start: first, pull record going next up on the chopping block. Is our cafe racer mini bike.

This thing started off life as a manco thunderbird modified the frame z50 tank seat from amazon that we modified handle bars. We chopped them and turned them into cafe style and the headlight from an early ct-70. It's got a built. 212 dual exhaust sting looks killer, it's one of our prettiest bikes so see if she'll start up for us first blow man so so up.

Next is the yamaha mx80. This is one of my personal favorites uh. It's a four speed. It's got suspension.

It's just really solid, a really fun bike to drive around the garage. We did a light restoration on it, but not too much work and it pretty much runs like a dream. So, oh now, on to one of our older builds, as you can probably tell by the now brown walls. This is a baja warrior that we built up to match the c10 um.

So it looks super cool. I'm excited to get it out there parked behind the c10, but pretty simple: it's got a built, hemi predator, on there. This is one of our first kind of full out. Custom builds.

We did the seat, we did the paint job, so it was really fun for us to get creative on this one. Let's try some choke next project we have right here is the little rascal. This is a kit from go power. Sports that we did.

It was one of our quickest builds because you get everything to build this bike in the kit and we got it powder coated. This nice kind of basis, brown color, went for kind of a western retro theme and it's pretty sweet. It's the smallest bike we have, and so let's see how she starts, putting on run gas wow. Well, we're done with all the bikes and the littler things now.

It's on to the big boys, so we've got right here this manco deuce that we swapped and put a ninja 250 sport bike motor in absolute ripper. It's got six gears revs up super high. We ox we have some oxman light bars on it totally decked out. So, let's give this thing: a start: sync tends to be fairly reliable, but sometimes it takes a little bit to get going.

So we'll see our luck on camera, she might be a little camera side, but we'll see how she goes. So this is one of our most eye-catching builds to say the least. This is from bikini bottom and it's the paddy wagon we made this out of paper mache and chicken wire. We got to pull out all of our arts and craft skills.

We made it for the red bull soap box, derby, for the derby. It didn't have an engine, but enough people commented and told us hey. You guys should drive around with an engine that we put a built tilleton on it from our race bike, so it rips. Now, to say the least, and let's go driving around oh seat's, not bolted down all the way.

That's all right! Thank you, shell city. Here we come okay, so a lot of you have been asking about the electric car up here. We just got the new motor controller in and actually tomorrow, we're going to pull this thing down and work on it, but it's not in running shape. Sadly, so here's our other non-running bikes.

This is our race bike. It has the motor that was turbocharged waiting for it. We just have to put it all together. That thing is going to be even more powerful than what this used to have.

So we're super excited for that and then right here we have a vintage nice patina. I think it's late 60s or early 70s or enthetic charger. This was an electric kind of mini bike. They were street legal, we're going to try and get this thing street legal rebuild the motor and use it for cruising around here get another electric project.

This is my dad's motor greasy tastes. Pretty cool can't take it for a rip and pull it out of the garage. So last, but certainly not least, is the rotary cart. This thing's the fastest most insane best handling thing we've ever built and yeah.

We definitely saved it for last, so this is a saks, 303 rotary engine from a hercules w2000, which was made in like 1971-72, and they only made 2000 of these motorcycles. So this is a very rare motor. We got it completely, seized worked it all through and it runs beautifully yep. So i got to tell you we did actually get this started off camera because it's a process, we're hoping it'll start with the kickstarter and i can knock off the kickstarter.

So, let's see what happens? No, i think we'll do it. Oh wait, ready, yeah, oh close, ready, so keep uh, so um. So now we're gon na start everything at the same time, sick bro. So we can't start the deuce because we had to take its battery for the rotary.

Oh all, right last one, oh cool, i think that's a wrap for that. One boys, yeah yeah y'all, enjoyed that and went all out dug out. Everything got everything working and running. Pretty much so yeah, i think i'll, like this video yeah thanks for watching and go powersports.

A lot of these parts in the builds are from go powersports, and especially thank y'all for watching and subscribing and letting us build all this awesome stuff and supporting us yeah yeah. And if you had a favorite that you'd like to see again shout out in the comments.