Thank you to G-Pop Shop to helping us with this step of the build, check out their website here!: https://gpopshop.com/
And Their NEW WEBSITE here:
https://www.carbonsealturbo.com/
Use Code “BBR5” at Evolution Power Tools for a discount! Use our link below: http://aspireiq.go2cloud.org/aff_c?offer_id=5959&aff_id=16074
Evolution Metal Chop Saw: https://store.evolutionpowertools.com/products/evosaw380
After blowing the seals in the first iteration of the turbo rotary ATV, we replaced the smaller VZ21 turbocharger with a larger GT15 turbo. We then sent it off to G-Pop Shop to be professionally balanced and machined for carbon seals to prevent oil from being sucked past the journal bearings. This will help us avoid drawing oil into our rotary engine and will make the setup much more reliable! We installed an oil pressure regulator to prevent us from pushing oil past the turbo seals, and so far it's very reliable.
**Be sure to check your local laws before driving any non-registered motorized vehicle. Do not attempt these activities at home. All content produced by Build Break Repeat is for entertainment purposes only**
PARTS LINKS BELOW! | Build Break Repeat is Proudly Sponsored by GoPowerSports and Hobart Welders
TURBO CHARGER – Affiliate Link
https://amzn.to/3c4is9i
GPS PARTS:
34MM MIKUNI – https://www.gopowersports.com/34mm-mikuni-carburetor/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Oil Reservoir - https://www.gopowersports.com/aluminum-catch-tank/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Battery – https://www.gopowersports.com/12-volt-9-amp-sealed-battery-chrome-7l-bs-yb9l-b-sealed/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
780 series driven pulley - https://www.gopowersports.com/780-driven-pulley-3-4-bore-aftermarket/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
780 series driver pulley - https://www.gopowersports.com/780-driver-clutch-aftermarket/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Jackshaft Brackets - https://www.gopowersports.com/adjustable-jackshaft-brackets-weld-on/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Jackshaft - https://www.gopowersports.com/3-4-jackshaft-not-threaded-19-long/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Sprocket - https://www.gopowersports.com/jackshaft-sprocket-type-b-420-3-4-bore/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Locking Collar - https://www.gopowersports.com/jackshaft-lock-collar-3-4/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
1” Lock Collars - https://www.gopowersports.com/bearing-3-4-1-3-8od/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
¼” Keystock - https://www.gopowersports.com/key-1-4-x-1-1-4-long-6123/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
AMAZON AFFILIATE PARTS:
Oil pump - https://amzn.to/3xIDYZI
Exhaust Bend (1.5”) - https://amzn.to/3MDbiFK
Jets - https://amzn.to/3tv7Mq2, https://amzn.to/39e4znZ, https://amzn.to/3aPyeV0
Comet 94C 30mm 1:10 taper driver pulley - https://amzn.to/3GSmU6l
Brake Master Cylinder - https://amzn.to/3x5tLFf
LINKS TO OUR NEW TOOLS AND EQUIPMENT: https://linktr.ee/BuildBreakRepeatChannel (Amazon Affiliate Links, if you buy something using our links it will help the channel!)
TOOLS
Tools we use and have received from sponsors:
HOBART Welding Equipment
https://www.hobartwelders.com/
Texas Metalworks 40x80 Welding Table
https://texasmetalworks.com/product/fully-fabricated-welding-table/
RogueFab Tubing Notcher
https://www.roguefab.com/product/versanotcher-universal-tubing-notcher/
SWAG Offroad PortaBand Table
https://www.swagoffroad.com/products/swag-portaband-pro-table
Pro-tools Tubing Bender
https://pro-tools.com/collections/tube-and-pipe-benders
Optrel Crystal 2.0 Welding Mask
https://usa.optrel.com/en/eye_protection_helmets/products/show/crystal20/
Optrel Grinding Mask
https://usa.optrel.com/en/products/augenschutz/helme-zum-schleifen-schneiden/products/show/clearmaxx/
MUSIC
Intro/Outro Song - Jimmi by Andrew Applepie
https://www.youtube.com/watch?v=l1zHz8pYfyQ&ab_channel=AndrewApplepie
SOCIAL MEDIA
CHECK OUT OUR INSTAGRAM! https://instagram.com/build.break.repeat?igshid=ulwwhmio96an
MERCH
MERCHANDISE CUSTOM DESIGNED BY YOURS TRULY
https://teespring.com/stores/build-break-repeat

Avatar photo

By YTB

23 thoughts on “Turbocharged rotary atv is complete! ep. 9”
  1. Avataaar/Circle Created with python_avatars Axon0081 says:

    I'd like to see more turbo engine videos

  2. Avataaar/Circle Created with python_avatars Rob U BLind says:

    Sick, now just needs an atv gearbox instead of go kart belt drive

  3. Avataaar/Circle Created with python_avatars MikeOrkid says:

    Stretch out that final drive. You have more than enough power to get to the current top speed/redline. I'm sure it can probably do double what it is.

  4. Avataaar/Circle Created with python_avatars nashguy207 says:

    Nice job guys. What a bummer about the brake breaking. Might want to look into a different caliper and pads. Have you talked to Daniel lately. I am still thinking of him and praying for him and you guys. God Bless!!

  5. Avataaar/Circle Created with python_avatars Nima someh says:

    thank you for the series 🙂

  6. Avataaar/Circle Created with python_avatars v2nce says:

    Hey guys just wondering how y'all find these rotary engines. Like where do you find them?? Please inform. I would like to build a rotary project of my own

  7. Avataaar/Circle Created with python_avatars rene78028 says:

    Add oil cooler after turbo

  8. Avataaar/Circle Created with python_avatars Jake Hartley says:

    So hype!!!! #1 fan

  9. Avataaar/Circle Created with python_avatars Jason Ketchum says:

    You guys should find a transmission from a Harley or something like that an run it .

  10. Avataaar/Circle Created with python_avatars Oliver Scorsim says:

    Awesome guys proper. Now the regulator return works like the turbo return that's why your getting 50 but otherwise beautiful. The rear brake looks like a scooter unit if not I'm sure you can get one locally for dirt and use it until the new stuff gets here.

  11. Avataaar/Circle Created with python_avatars ArcturanMegadonkey says:

    yes please do a vid on how to turbo any 4 stroke please.
    liked.

  12. Avataaar/Circle Created with python_avatars Engineered To Design says:

    Not a disappointing ending this stuff always happens that’s why it’s build BREAK repeat! Haha keen to see it finished with an awesome paint job 👌🏻

  13. Avataaar/Circle Created with python_avatars Jesse Fex says:

    Sooo hyped and waited for!

  14. Avataaar/Circle Created with python_avatars BryDuhBikeGuy says:

    Man,I hate when brakes break,and don't brake.The bypass regulator set-up is great.I think the exhaust is just that now.Have fun guys!Looking forward to your videos,as always.Hi Daniel too.

  15. Avataaar/Circle Created with python_avatars Rick Shown says:

    Y'all need to find somewhere that you can actually go run this thing get an actual test run out of it get it pulled up build some boost see if it's going to handle it your 50 yard putt turn around and another 50 yard put back doesn't show us that it actually runs worth of crap

  16. Avataaar/Circle Created with python_avatars quadsman11 says:

    Have been following you for quite some time, and continue to be impressed with your work !
    Have no idea where you are located, or what your plans are for your future.
    However, I would be extremely interested in talking with you about your future direction and plans for your career !

  17. Avataaar/Circle Created with python_avatars Dan Haasnoot says:

    Nice, interesting biuld but PLEASE get a belt/ clutch guard on that thing! If you have ever seen a belt or clutch explode at 6500 or any rpm you would not even think about running without a guard. Not to mention of your foot slips into the belt or your pant leg gets caught.
    I have been around snowmobiles for a very long time and seen first hand what happens when those clutches and or belts go boom, it aint pretty!!

  18. Avataaar/Circle Created with python_avatars geoffreyjones2000 says:

    I learned to ride with no brakes … 1969

  19. Avataaar/Circle Created with python_avatars Daciana Zerinity says:

    Congratulations on getting this to work well! That's absolutely amazing! The way it braps is awesome I love the sound. See if you can't antilag the single rotor. Needs more flames!!!

  20. Avataaar/Circle Created with python_avatars BighomieJ5x - says:

    This quad is awesome

  21. Avataaar/Circle Created with python_avatars FukU2222 says:

    gpop shop are still kicking? They've been doing turbo mods/machining for a while now

  22. Avataaar/Circle Created with python_avatars John 12:44-50 says:

    You definitely need a EFI kit with tuneable ECU or blow through carburettor, the fuel hitting the impeller will negatively effect turbo performance and give poor atomisation of the fuel.

  23. Avataaar/Circle Created with python_avatars piano 🎹 boy 😇 says:

    I see you guys don't read the comments on your videos 😔

Leave a Reply

Your email address will not be published. Required fields are marked *