Oh, what is up y'all welcome back to the ltg gray mini bike build, and today we are going to drive this thing, but before we can get to doing that, we need some brakes and throttle and kill switch stuff like that, basically just the essentials to be Able to move around and stuff so the first thing we're going to get started on is adding our brake. We have this brake band here from go power sports and the idea is we're just going to kind of. Have it go around the clutch, like so kind of just like how we did it on our cafe? Racer mini bike turned out super good, so let's just get started on that. It's going to be quite a bit of metal fab because we do have to use these bolt holes around here to kind of pull out the clutch and then have just a section here.

So let's get started this bracket's kind of just bolted in and then the idea is just the brakes going to go up here and this bolt's going to get welded on, but because it's a little bit ugly, i'm going to come in with a sharpie and we Can shave this down? That's the contour of our motor. That's really sweet! Okay, so we got our little brake band on and tighten it up. That is pretty sweet. So now what we got to do is you guys got ta run a cable through here.

That way, you can pull that on there get it hooked up to our handlebars and we will have brakes, that's pretty clean, we got our kill, switch and our throttle on the handlebars. Just go power, sports kill, switch and throttle, and then we just need to figure out how to hook up this carb so that the governor works and our throttle hooks up to it, see how it works. Yeah, nice and tight yeah pretty good, maybe tighten it a little bit more, but it's going to be good sweet. Our throttle is now set up.

We actually got it so that we have the governor working and it kind of needed just a little bit of massaging, and we got this all set up using the stock yeah sweet. That's some crazy, throw we got there yeah the twist grip moves like that. Much sick all right, so let's run her and test all the stuff. That's cool, ready! Yeah! Oh sweet! That's a rotary right! There, baby all right! So the rotary is completely ready.

We've tested it everything's bolted down and tight. So we have a viewer. That's letting us use his property, so the last thing we need to do before we go. There is mix up some two-stroke fuel we're running 50 to 1 on this bad boy, yep, that's what it says on the label, so we got it all loaded up in the truck we're here with the rotary and the race bike.

A fan of ours named daniel. Actually was kind enough to let us use his property to rip so yeah. I got a little space out here. I learned these guys were pretty close.

I saw some of their videos with the you know them driving around some places. I recognize so i reached out to them told them to come out here and and rip it. I got six acres, a giant shop and uh. You know i do all this sort of this fun stuff, mostly cars, but i've got a youtube channel too dj tuning is the the youtube channel.

Don't have a lot of subscribers, but i haven't posted in a while either. That's probably why yeah, but no it's super cool, definitely excited to use some of this property and get you know a lot of good content here and sweet. Let's just get on these things and do some ripping yeah all right, cool, all right, so, okay, so on that last pull we did a bit of a rolling race and you can probably hear and see that thing hit the power band it looks like we might Need a bigger sprocket on this. Actually, it's really big right now, but it's just rotaries.

You know we could throw a bigger one on the jack shaft. That way we can have a little bit more step down to be knit yeah. That's true! Oh! So! Thank you. Yeah, this is sweet.

That was the coolest trip. I've ever taken all right, so we've had a lot of time riding this thing. This thing could definitely benefit from a regular. We just didn't know how torquey the little rotary would be the race bike's insane as always so, but it is a little bit out of its element, it's more of like a pavement kind of thing, more of a show bike, but it's real fast.

So we'll just have some more fun. I'm also excited to try it out. So let's see what you do so all right guys. So the rotary is finished.

It did super awesome, it really outperformed. What i was thinking would do i mean we need to do a little re-gear, maybe a little carb work but like it's super solid super fun, really exactly what i hoped it would be, and then, as always, the race bike totally rips and wants to kill us. So yeah joe yeah, so once again thank you to go power sports for the parts we use on this thing and a huge thank you to daniel for letting us rip around his property. We want to come around here for a while and it's great that we got to ride around and have some fun and looking for some more videos here in the future.

So thank you for watching make sure to check out his channel at dj tuning. We have some links in the video and make sure to subscribe and like this video and we'll catch you next time. Oh that's, big cool, my college in your yeah wow, so well, they're, just ripping all sorts of stuff out here. Yeah man, that's what it's about! Um.