In the basic life cycle of a build there is building, breaking, and doing it all again until a project reaches a point of completion where it can take anything you can throw at it. Enter Rally Kart.
In this video the rally kart gets fully some awesome power upgrades and some stability and comfort! This is the most work we've ever crammed into one video! What we do is make a completely new seat, steering system, mud flaps, and side bars. It's a basic kart build but with the special intention to be developed as more of a "rally" kart. Meaning that it can have plenty of grip but also be capable of jumps, offroad, ect. What we needed to do to get it going was build the predator 212 engine with go power sports performance parts, attach the rear axle with new wheels and tires. Hook up the torque converter and chain, then finally work out the go kart throttle and brake and then this thing was ready to drive on some gravel roads!
**Be sure to check your local laws before driving any non-registered motorized vehicle. Do not attempt these activities at home. All content produced by Build Break Repeat is for entertainment purposes only.**
Thanks for watching and be sure to subscribe!
INTRO SONG: https://andrewapplepie.bandcamp.com/track/jimmi
PARTS-
-Catch cans- https://www.gopowersports.com/aluminum-catch-tank/?utm_source=YOUTUBE&
-Springer Spindles- http://www.gopowersports.com/springer-spindles/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Tie Rods- http://www.gopowersports.com/tie-rod-generic-3-8/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Tires- http://www.gopowersports.com/13x500-6-slick-tire/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Sprocket Hub- http://www.gopowersports.com/1-sprocket-carrier-sprocket-hub/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Sprocket- http://www.gopowersports.com/manco-live-axle-sprockets-41-420-chain/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Rear Rims- http://www.gopowersports.com/one-piece-live-axle-wheel-for-6-tires-out-of-stock/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Locking Collars- http://www.gopowersports.com/axle-lock-collar-1/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Axle Hangers- http://www.gopowersports.com/3-hole-axle-bearing-kit/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Brakes-http://www.gopowersports.com/go-kart-mechanical-brake-disc-kit-9511-9598-th1000/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Live Axle Kit- http://www.gopowersports.com/live-axle-kit-complete-38-axle-6-live-axle-wheels-are-on-backorder-6-wheel-kits-will-not-ship-until-end-of-may/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Predator 212 Engine- http://www.gopowersports.com/6-5-hp-212cc-predator-engine/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-30 Series Torque Converter- http://www.gopowersports.com/tav-30-75-torq-a-verter-comet-after-market-replacement/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Valve Springs- http://www.gopowersports.com/18lb-valve-springs/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Performance Kit- http://www.gopowersports.com/stage-1-predator-performance-kit-for-196cc-212cc-engines/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Gussets- http://www.gopowersports.com/3-x-3-gusset/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Side bar steel https://www.gopowersports.com/two-seat-side-restraints-12/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Steering Hoop https://www.gopowersports.com/steering-hoop-engine-gaurd/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Weld On Frame Parts (Gussets, Bars, Ext.) https://www.gopowersports.com/go-kart-parts/weld-on-frame-parts/?sort=alphaasc&page=1/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-22mm Mikuni Carb! https://www.gopowersports.com/22mm-mikuni-carburetor-performance-kit/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Springs We Used for the Seat https://www.gopowersports.com/spindle-compression-spring-pair/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Steering Shaft Kit https://www.gopowersports.com/steering-shaft-kit/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Steering Wheel https://www.gopowersports.com/150-250-300-steering-wheel/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video

BBR MERCHANDISE

https://www.etsy.com/shop/BuildBreakRepeat
^^^^^^Click this link to check out our awesome new merchandise!

Avatar photo

By YTB

23 thoughts on “Trying to break the rally kart”
  1. Avataaar/Circle Created with python_avatars Don Soprano says:

    You guys rock,any kart or mini events/rallies around that you guys attend or know of

  2. Avataaar/Circle Created with python_avatars Joel Boley says:

    When we built our go karts we were so ready to ride it by the time it's ALMOST DONE , we had to try it finished or not!

  3. Avataaar/Circle Created with python_avatars GearheadsGarage336 says:

    that jump was EPIC!!!

  4. Avataaar/Circle Created with python_avatars game frieks says:

    Make more video's about the 2 stroke racing cart

  5. Avataaar/Circle Created with python_avatars Ajm23 says:

    Rip rear axle ๐Ÿ˜‚๐Ÿ˜‚๐Ÿ˜‚

  6. Avataaar/Circle Created with python_avatars fishcop nh says:

    Would u sell that

  7. Avataaar/Circle Created with python_avatars YoungAtlas says:

    You should probably get springer brackets for the front end

  8. Avataaar/Circle Created with python_avatars Hammer says:

    Put a fn helmet on y'all

  9. Avataaar/Circle Created with python_avatars Mary Jane Dolejsi says:

    Intro song please???????

  10. Avataaar/Circle Created with python_avatars Michael McFarland says:

    Is that kart geard ?

  11. Avataaar/Circle Created with python_avatars Chris Yerp says:

    man thats a slow cart lol no safety yall need to do some work to your engine block work

  12. Avataaar/Circle Created with python_avatars VanLifePays says:

    Did someone shoot a gun behind you in the intro?!

  13. Avataaar/Circle Created with python_avatars Pebble Beach says:

    Are you allergic to being safe and wearing a crash helmet or do you like being irresponsible and stupid?

  14. Avataaar/Circle Created with python_avatars Fred Knows says:

    Are you afraid of damaging your crash helmet is that why you guys only wear your helmet when filming. One little mistake and you can become a vegetable.

  15. Avataaar/Circle Created with python_avatars edgars lacis says:

    If you fly with that bike that high then the airplane is underneath the ground

  16. Avataaar/Circle Created with python_avatars Arden Nielsen says:

    omg that intro

  17. Avataaar/Circle Created with python_avatars Hola! Scot Soaring says:

    Crash helmets are for more than holding cameras. Wear them.

  18. Avataaar/Circle Created with python_avatars Uncle Muir says:

    When I was a kid I knew a kid at my school that had a minor accident and wasn't wearing a helmet and hit his head. He had to relearn everything. At 60 years old he still can't live by himself. Put on some safety equipment and keep it on.

  19. Avataaar/Circle Created with python_avatars Colby Bailey says:

    But some atv tires on the back

  20. Avataaar/Circle Created with python_avatars A.J.'s Garage says:

    You know whats in Texas? Steers, queers, and go kart engineers!

  21. Avataaar/Circle Created with python_avatars Innocent Miscreant says:

    When it says full send you gotta watch the video and give it a like

  22. Avataaar/Circle Created with python_avatars Ian s says:

    Great idea for mud flaps

  23. Avataaar/Circle Created with python_avatars _RiskJr_ says:

    HELL YEAH! but one thing… put some knobby tires on that thing so you get some more grip in the straights but you will definitely still get sideways in the corners

Leave a Reply

Your email address will not be published. Required fields are marked *