In this video we challenge the fully built baja mini bike with go power sports parts against the untouched bike with no upgrades to see how they stack up against each other! The Sinclair c10 bike has a stage 2 built engine with a torque converter, mikuni, and a high flow exhaust. We also test the top speed in both of the bikes and get shocking results. Stay tuned to the end of the vid to see the c10 mini bike race the c10!
Thank you guys for watching and be sure to subscribe to see this mini bike transform into a c10 look alike!
**Be sure to check your local laws before driving any non-registered motorized vehicle. Do not attempt these activities at home. All content produced by Build Break Repeat is for entertainment purposes only.**
INTRO SONG: https://andrewapplepie.bandcamp.com/track/jimmi
MUSIC - Lakey Inspired
Blue Boi
https://soundcloud.com/lakeyinspired/blue-boi
GPS- http://www.gopowersports.com/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video

PARTS

-Replacement Brake Shoes
https://www.gopowersports.com/mini-bike-brake-pads/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Torque Converter
https://www.gopowersports.com/tav-30-75-torq-a-verter-comet-after-market/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Foot Pegs
https://www.gopowersports.com/mb200-front-foot-pegs-pair/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-DID Chain
https://www.gopowersports.com/did-420d-motorcycle-chain/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Throttle Kit
https://www.gopowersports.com/throttle-twist-grip-7-8/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Hemi Clear Valve Cover
https://www.gopowersports.com/hemi-clear-valve-cover/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-22mm Mikuni Carbuetor
https://www.gopowersports.com/22mm-mikuni-carburetor-performance-kit/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Header Pipe
https://www.gopowersports.com/header-pipe-coleman-ct200-bt200-mini-bikes/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-RLV Muffler
https://www.gopowersports.com/rlv-4104-1-5-16-exhaust-silencer-with-hd-ss-clamp/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Valve Springs
https://www.gopowersports.com/18lb-valve-springs/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Billet Rod
https://www.gopowersports.com/predator-performance-billet-connecting-rod/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Billet Flywheel (Hemi)
https://www.gopowersports.com/arc-billet-flywheel-212cc-hemi-predator/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Cam!
https://www.gopowersports.com/mod2-camshaft-212cc-hemi-predator-196cc-clone-gx200/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Thin Head Gasket (Higher Compression)
https://www.gopowersports.com/010-head-gasket-212cc-hemi-predator/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Flat Top Piston (only $20!)
https://www.gopowersports.com/flat-top-piston-for-212cc-predator-70mm-570-compression-height/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Performance Spark Plug
https://www.gopowersports.com/autolite-3910x-spark-plug/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Complete Stage 2 Engine Kit
https://www.gopowersports.com/stage-2-212cc-hemi-predator-performance-kit/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video

BBR MERCHANDISE

https://www.etsy.com/shop/BuildBreakRepeat
^^^^^^Click this link to check out our awesome new merchandise!

Avatar photo

By YTB

23 thoughts on “Fully built vs bone stock baja mini bike”
  1. Avataaar/Circle Created with python_avatars dxcenataker says:

    Y’all planned that sequenced startup lol

  2. Avataaar/Circle Created with python_avatars Chris Kobe says:

    There is no way the predator 212cc went that fast that's cap

  3. Avataaar/Circle Created with python_avatars Dennis Meyer says:

    Where did you get the wide white wall tires???

  4. Avataaar/Circle Created with python_avatars Levi Morris says:

    How’d you get whitewall tires

  5. Avataaar/Circle Created with python_avatars Shootin "n" Scootin says:

    Great build! Hopefully buying one soon. You guys need to get a handle bar phone attachment so you don't have to ride one handed.

  6. Avataaar/Circle Created with python_avatars Tony Svetic says:

    Where did you get the white wall tires

  7. Avataaar/Circle Created with python_avatars Kelly Edington says:

    Fun too watch, good job fellas

  8. Avataaar/Circle Created with python_avatars devrolet1 says:

    My Mega Moto Classic 212 does 43 miles per hour with governor disconnected stock air filter ,stock exaust , but I did add a cheap tav2-30 series torque convertor M1 0-w40 oil So I want to see how fast you can get that Warrior to go stock just governor disconnected

  9. Avataaar/Circle Created with python_avatars devrolet1 says:

    Please do the same test with the governor disconnected on the stock one

  10. Avataaar/Circle Created with python_avatars Doober says:

    Y’all love white walls huh lol there beautiful I don’t blame you

  11. Avataaar/Circle Created with python_avatars Jacob Sebastien says:

    Put a Tillotson Engine 💪😏

  12. Avataaar/Circle Created with python_avatars Bryson Hooke says:

    The bike is good but why did you put white wall tiers

  13. Avataaar/Circle Created with python_avatars 392 Life says:

    Them start pulls was on point

  14. Avataaar/Circle Created with python_avatars Tommy Boy says:

    My mini baja with a 196cc 4 stroke does 40 mph it has its governor removed and has a torque converter

  15. Avataaar/Circle Created with python_avatars Ogmari6 says:

    My mini bike does 44 with just 18 pound valve springs .036 carb jet air filter and a autolite spark plug

  16. Avataaar/Circle Created with python_avatars Dan Johnston says:

    Guys, you need to work on those clutch to get the engine to rev higher. Stiffer springs in the primary and secondary will help get the engine up in rpm where it makes more power. Also try the smallest sprocket you can get for the torque converter. The problem with these torque converters is they shift out to soon and pull the rpm of the engine down limiting top speed.

  17. Avataaar/Circle Created with python_avatars cobrasvt347 says:

    Is sounds good too

  18. Avataaar/Circle Created with python_avatars cobrasvt347 says:

    Lol synchronized starting !

  19. Avataaar/Circle Created with python_avatars Altared TV says:

    I would love to see a drag race with just taking the governor off the stock bike. It would be nice to know the difference the stage 2 makes over that.

  20. Avataaar/Circle Created with python_avatars mlindsay527 says:

    Did you change the springs in the torque converter to take advantage of the higher RPM capability?

  21. Avataaar/Circle Created with python_avatars Joey Ornelas says:

    Good work love it I hit 50mph on a stage 1 kit with torque converter and Governor still in. Love the videos keep it up

  22. Avataaar/Circle Created with python_avatars Ryan Greenberg says:

    I hit 60 mph with my tool shed 212cc engine with,
    .20 billet rod, .265 cam, lightened crankshaft, chromoly pushrods, 22lb valve spring and a stock carb with .38 jet and stock 10 tooth centrifuge clutch with 50 tooth rear sprocket and that was running lean because it only revved to 5,300 and on a stand with .41 jet it revved to 8,800 rpm and I haven't taken it out running good so I'm hoping to hit 70

  23. Avataaar/Circle Created with python_avatars Build Break Repeat says:

    CHANNEL UPDATE:

    Looks like we have plenty of videos to make to till next summer while we are at college, so we are going to be releasing twice a week on Wednesday and Sunday for the time being.

    Wednesday videos will be Jeep/car content and Sunday videos will be the usual. We also have some shorter bonus videos of go kart content we can post on Wednesday’s after we are out of Jeep vids!

    Thanks and let’s start the journey to 100k!

Leave a Reply

Your email address will not be published. Required fields are marked *