Here's a quick little walk around to show the Jeep CJ before our restoration. The plan for this CJ is to give it a Chevy 350 V8 with a 5 Speed AX15. We want it to be a reliable daily that can also tear it up off road. Were gonna be doing a complete frame off restoration and paint, ext.
This should be an awesome build and were gonna record every bit of it so stay tuned and subscribe for some more updates.

Avatar photo

By YTB

13 thoughts on “Project intro jeep cj7 build part 1”
  1. Avataaar/Circle Created with python_avatars Hola! Aaron Tostado says:

    I just started my restoration on my 1983 CJ7. Your videos are going to help me so much along my journey! I'll create a channel and document it just as you did. Thanks for the inspiration brother! ๐Ÿ’ฏ๐Ÿ’ช

  2. Avataaar/Circle Created with python_avatars David Keetz says:

    "we gonna restore it" ……and by restore we mean sporterize it and build a family roll cage, racer seats, ditch the gauges, chevy engine…..basically I don't want a jeep but I want to look like I get down with rock crawling.

  3. Avataaar/Circle Created with python_avatars adam genazzio says:

    Just got a '79 CJ7 that came out of a barn in Tennessee. In pretty good shape and i'll be watching the whole series for tips and how-to's. A little intimidated as I get into it as far as you guys did (especially the wiring), but like the challenge and want mine to look as good as yours when done. What I've seen so far is great!

  4. Avataaar/Circle Created with python_avatars David Grason says:

    I know that putting a Chevy SB would be fun but honestly, I just love the original straight 6. Yes, it's true that it doesn't have the ponies of the SBC but it has more than plenty for a CJ7 and I think it's better for off-roading. It's better balanced as far as center of gravity and has tons of torque.
    But hey, that's me.

  5. Avataaar/Circle Created with python_avatars Kerry Werner says:

    I have the ugly stepsister to your jeep,lol. Just got a 1981 jeep cj5 4cyl. In very bad shape, talking frame rot some parts are gone in the back. Needs full restoration. Iโ€™ve got lots of work ahead of me. Will the transfer case bolt right up to a 350 Chevy? Thanks

  6. Avataaar/Circle Created with python_avatars hayden nix says:

    What was total cost after full restoration? $3,000 for Jeep and how much for parts/body work?

  7. Avataaar/Circle Created with python_avatars Justin Opotzner says:

    All these issues… Sounds like a CJ!

  8. Avataaar/Circle Created with python_avatars Brad Geddes says:

    I am looking for a project for my boys and I. What was the total cost of this including the jeep? Can you break it down?

  9. Avataaar/Circle Created with python_avatars 7B Adventure says:

    nice looking cj

  10. Avataaar/Circle Created with python_avatars PetrocelliPete says:

    Looks like you guys know what you're doing. I'll watch the whole series. I used to have a '74 CJ5 with a 304 and a 3 speed. I was your age, and pulled the body, but not to the extend of mods as you guys. They are scary as hell, on the highway. Thinking back, there is no way I would have done what I did back then, but you're only young once. It had dual exhaust with the pipes exiting before the rear tires. It had a performance cam, and sounded great. Just make sure your brakes are good, and do not pull. A CJ can end up sideways and upside down real fast when breaking. Enjoy it, and respect the little pedal. Cheers.

  11. Avataaar/Circle Created with python_avatars davidking3311 says:

    Thats already nicer than most "restored" jeeps I see, especially on the east coast.

  12. Avataaar/Circle Created with python_avatars Mike Smith says:

    Nice jeep bud

  13. Avataaar/Circle Created with python_avatars Clayton Kitner says:

    my dad has owned a 82 CJ7 with a 401 v8 (pushin about 400hp) in it for over 20 years and it makes me pucker my ass everytime i get in it… these ole jeeps are wild (and damn near scary) to drive

Leave a Reply

Your email address will not be published. Required fields are marked *