In this video we completely resurrect and rip a junkyard built 2 wheel drive mini bike. The build off took us 2 days of long nights and many hours searching around the Pate Swap Meet.
The idea of the build off was a weekend project where each team spent as little money as they could and used only parts they find at the swap meet to make the craziest and fastest mini bike they could think of. We thought the best way to do this was through an AWD mini bike setup, which turned out to completely rip and just destroy front tires and do crazy mini bike burn outs.
What we did was we found a frame for $60, 2 Briggs and Stratton Flat Head engines; one for $10 and a complete one for $50, some free parts, and a $30 wheel and hub assembly for the front wheel drive. After getting back to Go Power Sports we worked on mounting the front engine plate so we could test the idea. After that we test drove it as a front wheel drive mini bike and it was a ton of fun but we had some issues with the plate flexing and chain tensioning. After that we added the rear engine and some other cool things like a mikuni carb and a rear motorcycle fender then we headed over to the swap meet with CarsandCameras, Red Beards Garage, and Rather B Welding!
The "competition" was really fun and a ton of people were there to help and we really felt like a family with these guys.
Thanks for watching and be sure to subscribe to see this thing in the future!
**Be sure to check your local laws before driving any non-registered motorized vehicle. Do not attempt these activities at home. All content produced by Build Break Repeat is for entertainment purposes only.**
BBR Extra Channel : https://youtu.be/ofy69SxsrPE
MUSIC-
Intro Song: https://andrewapplepie.bandcamp.com/track/jimmi
Time-lapse Music by Joakim Karud http://youtube.com/joakimkarud
PARTS-
Clutch and Chain for both engines
http://www.gopowersports.com/12t-3-4-bore-clutch-and-chain-kit-35/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Mikuni
http://www.gopowersports.com/original-mikuni-vm22-133-carburetor/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Throttle Cables
http://www.gopowersports.com/44-throttle-cable/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Seat
http://www.gopowersports.com/12-mini-bike-seat/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Header Pipes
http://www.gopowersports.com/predator-performance-header-pipe/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Muffler
http://www.gopowersports.com/rlv-4104-1-5-16-exhaust-silencer-with-hd-ss-clamp/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Thank you GoPowerSports!
Rebuild Kit Flathead Briggs: https://www.ebay.com/i/141122295009?chn=ps&ul_ref=https%253A%252F%252Frover.ebay.com%252Frover%252F1%252F711-117182-37290-0%252F2%253Fmpre%253Dhttps%25253A%25252F%25252Fwww.ebay.com%25252Fi%25252F141122295009%25253Fchn%25253Dps%2526itemid%253D141122295009%2526targetid%253D483914785630%2526device%253Dm%2526adtype%253Dpla%2526googleloc%253D9027902%2526poi%253D%2526campaignid%253D1497794566%2526adgroupid%253D60666402147%2526rlsatarget%253Dpla-483914785630%2526abcId%253D1139446%2526merchantid%253D6413034%2526gclid%253DCj0KCQjwof3cBRD9ARIsAP8x70OT06E3hVzZvTiv-uk4x7v86MDAHltGEtLL9xfT8HmXEHFd6vmZaWgaAuSTEALw_wcB%2526srcrot%253D711-117182-37290-0%2526rvr_id%253D1670929895270%2526rvr_ts%253De7bf50611650ac19be25507efff26f88
BRAND NEW BBR MERCHANDISE
https://www.etsy.com/shop/BuildBreakRepeat
^^^^^^Click this link to check out our awesome new merchandise!
The idea of the build off was a weekend project where each team spent as little money as they could and used only parts they find at the swap meet to make the craziest and fastest mini bike they could think of. We thought the best way to do this was through an AWD mini bike setup, which turned out to completely rip and just destroy front tires and do crazy mini bike burn outs.
What we did was we found a frame for $60, 2 Briggs and Stratton Flat Head engines; one for $10 and a complete one for $50, some free parts, and a $30 wheel and hub assembly for the front wheel drive. After getting back to Go Power Sports we worked on mounting the front engine plate so we could test the idea. After that we test drove it as a front wheel drive mini bike and it was a ton of fun but we had some issues with the plate flexing and chain tensioning. After that we added the rear engine and some other cool things like a mikuni carb and a rear motorcycle fender then we headed over to the swap meet with CarsandCameras, Red Beards Garage, and Rather B Welding!
The "competition" was really fun and a ton of people were there to help and we really felt like a family with these guys.
Thanks for watching and be sure to subscribe to see this thing in the future!
**Be sure to check your local laws before driving any non-registered motorized vehicle. Do not attempt these activities at home. All content produced by Build Break Repeat is for entertainment purposes only.**
BBR Extra Channel : https://youtu.be/ofy69SxsrPE
MUSIC-
Intro Song: https://andrewapplepie.bandcamp.com/track/jimmi
Time-lapse Music by Joakim Karud http://youtube.com/joakimkarud
PARTS-
Clutch and Chain for both engines
http://www.gopowersports.com/12t-3-4-bore-clutch-and-chain-kit-35/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Mikuni
http://www.gopowersports.com/original-mikuni-vm22-133-carburetor/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Throttle Cables
http://www.gopowersports.com/44-throttle-cable/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Seat
http://www.gopowersports.com/12-mini-bike-seat/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Header Pipes
http://www.gopowersports.com/predator-performance-header-pipe/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Muffler
http://www.gopowersports.com/rlv-4104-1-5-16-exhaust-silencer-with-hd-ss-clamp/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Thank you GoPowerSports!
Rebuild Kit Flathead Briggs: https://www.ebay.com/i/141122295009?chn=ps&ul_ref=https%253A%252F%252Frover.ebay.com%252Frover%252F1%252F711-117182-37290-0%252F2%253Fmpre%253Dhttps%25253A%25252F%25252Fwww.ebay.com%25252Fi%25252F141122295009%25253Fchn%25253Dps%2526itemid%253D141122295009%2526targetid%253D483914785630%2526device%253Dm%2526adtype%253Dpla%2526googleloc%253D9027902%2526poi%253D%2526campaignid%253D1497794566%2526adgroupid%253D60666402147%2526rlsatarget%253Dpla-483914785630%2526abcId%253D1139446%2526merchantid%253D6413034%2526gclid%253DCj0KCQjwof3cBRD9ARIsAP8x70OT06E3hVzZvTiv-uk4x7v86MDAHltGEtLL9xfT8HmXEHFd6vmZaWgaAuSTEALw_wcB%2526srcrot%253D711-117182-37290-0%2526rvr_id%253D1670929895270%2526rvr_ts%253De7bf50611650ac19be25507efff26f88
BRAND NEW BBR MERCHANDISE
https://www.etsy.com/shop/BuildBreakRepeat
^^^^^^Click this link to check out our awesome new merchandise!
That cool how fast did it go
Does it do any good in the dirt?
Filter comments? UNSUBBED
And you filter comments lol your a joke no wonder your at 50k
Use different sprockets for front and back. For example rear one make u accelerate fast and front one could have better top speed u know I mean 😀
So here's an idea, keep the front one as a low end and start off, then gear down the rear to make it top end. So you get going with the front and then have topend with the rear
Hey. I need my briggs back now. Lol
wear did you get that metal exhaust flap thing
Best intro
Awesome bike!
Great job guys looks cool.
Have a great day
Mark
Hey y’all hope you enjoyed this video, just to let you know we made a behind the scenes channel so we can practice different styles of editing and post random stuff that might not always be related to the go kart stuff we do. So you should totally check it out and give us your thoughts and feedback! BBR Extra (link in description)
Did you guys hone the cylinder before putting in the new piston and rings? If so, what did you use?
Which engine is faster?
"just cant kill these flat head briggs, aspecially after we just rebuilt this one" lmao
I need the link to the rebuild kit you guys bought!
popin jon minibike
Love you guys
Hey, what video editing software do you use??
Is that fornt wheel drive to
Love it
Got a bit pike in gunbarrel for sale needs new head was sold to me with bent intake valve but ran good for a week really fast 50mph+ put a 150cc big bore on it it would rip
good job keep up the good work
4th and hi