In this video the rally kart gets fully some awesome power upgrades and some stability and comfort! This is the most work we've ever crammed into one video! What we do is make a completely new seat, steering system, mud flaps, and side bars. It's a basic kart build but with the special intention to be developed as more of a "rally" kart. Meaning that it can have plenty of grip but also be capable of jumps, offroad, ect. What we needed to do to get it going was build the predator 212 engine with go power sports performance parts, attach the rear axle with new wheels and tires. Hook up the torque converter and chain, then finally work out the go kart throttle and brake and then this thing was ready to drive on some gravel roads!
We were really surprised by how well it preformed and how you could use the oversteer to accelerate out of corners! We are really happy with how this thing has turned out and we are looking forward to add some power upgrades as well as make this thing into more of a rally inspired go kart.
Thanks for watching and be sure to subscribe!
**Be sure to check your local laws before driving any non-registered motorized vehicle. Do not attempt these activities at home. All content produced by Build Break Repeat is for entertainment purposes only.**
INTRO SONG: https://andrewapplepie.bandcamp.com/track/jimmi
PARTS-
-Springer Spindles- http://www.gopowersports.com/springer-spindles/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Tie Rods- http://www.gopowersports.com/tie-rod-generic-3-8/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Tires- http://www.gopowersports.com/13x500-6-slick-tire/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Sprocket Hub- http://www.gopowersports.com/1-sprocket-carrier-sprocket-hub/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Sprocket- http://www.gopowersports.com/manco-live-axle-sprockets-41-420-chain/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Rear Rims- http://www.gopowersports.com/one-piece-live-axle-wheel-for-6-tires-out-of-stock/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Locking Collars- http://www.gopowersports.com/axle-lock-collar-1/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Axle Hangers- http://www.gopowersports.com/3-hole-axle-bearing-kit/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Brakes-http://www.gopowersports.com/go-kart-mechanical-brake-disc-kit-9511-9598-th1000/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Live Axle Kit- http://www.gopowersports.com/live-axle-kit-complete-38-axle-6-live-axle-wheels-are-on-backorder-6-wheel-kits-will-not-ship-until-end-of-may/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Predator 212 Engine- http://www.gopowersports.com/6-5-hp-212cc-predator-engine/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-30 Series Torque Converter- http://www.gopowersports.com/tav-30-75-torq-a-verter-comet-after-market-replacement/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Valve Springs- http://www.gopowersports.com/18lb-valve-springs/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Performance Kit- http://www.gopowersports.com/stage-1-predator-performance-kit-for-196cc-212cc-engines/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Gussets- http://www.gopowersports.com/3-x-3-gusset/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Side bar steel https://www.gopowersports.com/two-seat-side-restraints-12/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Steering Hoop https://www.gopowersports.com/steering-hoop-engine-gaurd/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Weld On Frame Parts (Gussets, Bars, Ext.) https://www.gopowersports.com/go-kart-parts/weld-on-frame-parts/?sort=alphaasc&page=1/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-22mm Mikuni Carb! https://www.gopowersports.com/22mm-mikuni-carburetor-performance-kit/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Springs We Used for the Seat https://www.gopowersports.com/spindle-compression-spring-pair/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Steering Shaft Kit https://www.gopowersports.com/steering-shaft-kit/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Steering Wheel https://www.gopowersports.com/150-250-300-steering-wheel/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video

BBR MERCHANDISE

https://www.etsy.com/shop/BuildBreakRepeat
^^^^^^Click this link to check out our awesome new merchandise!

Avatar photo

By YTB

23 thoughts on “Rally kart build part 3 frame and engine modifications”
  1. Avataaar/Circle Created with python_avatars NicNak says:

    I got a question. Is it just a stage one predator with a new carb?

  2. Avataaar/Circle Created with python_avatars Tren1hdt says:

    Great content. You gave me the motivation to finish my Suzuki ts185 two stroke shifter kart

  3. Avataaar/Circle Created with python_avatars Delicious DeBlair says:

    Drifting is not only easy on gravel, if you're not careful you'll big time crash and burn!

  4. Avataaar/Circle Created with python_avatars Matthias Mantel says:

    Do y'all sell the go karts you build?

  5. Avataaar/Circle Created with python_avatars Timm says:

    Who long is the hole kart?

  6. Avataaar/Circle Created with python_avatars Nick habat says:

    Needs a hydro ebrake

  7. Avataaar/Circle Created with python_avatars David Baker says:

    Merry Christmas to you and your family’s!

  8. Avataaar/Circle Created with python_avatars BryDuhBikeGuy says:

    Sweet build you guys.Going to 'red-n-white it',to semi match the C70 Mini?That would be Awesome.Merry Christmas to All,and to all a fun ride.

  9. Avataaar/Circle Created with python_avatars Blake Nicholas says:

    Sputnik would be proud.

  10. Avataaar/Circle Created with python_avatars Carl says:

    Merry Christmas guys

  11. Avataaar/Circle Created with python_avatars Backyard creations says:

    Sweet idea with the seat shocks 👍👍. I hope y’all added some limiting straps so the seat can’t fly forward

  12. Avataaar/Circle Created with python_avatars Montaña Wildcat says:

    F Yeah! Good video!

  13. Avataaar/Circle Created with python_avatars Troy Crowder says:

    nice job on the cart guys looks fun and for sure fast keep up the good work and hay dig the springer seat that's a good one

  14. Avataaar/Circle Created with python_avatars Altared TV says:

    So did the springer seat help?

  15. Avataaar/Circle Created with python_avatars Talan Peterson says:

    I have a good and bad idea: enclosed cab on the rally kart

  16. Avataaar/Circle Created with python_avatars drive it break it fix it says:

    What size of tubing is the frame made out of

  17. Avataaar/Circle Created with python_avatars elesjuan says:

    Hey my dudes. There's nothing wrong with that HF bandsaw! I've scored a couple of these things off craigslist for a hundro and they're FANTASTIC!

    keep up the awesome work!

  18. Avataaar/Circle Created with python_avatars Sam’s Garage says:

    Wow you guys did Surgery to that gokart and it’s fast. Nice job

  19. Avataaar/Circle Created with python_avatars Stephanie Hart says:

    pant ?

  20. Avataaar/Circle Created with python_avatars KBAKER it's all about nobody. says:

    I like fenders better than mud flaps.

  21. Avataaar/Circle Created with python_avatars Steven Walker says:

    I know that your legs and arms got weld burned from the light.

  22. Avataaar/Circle Created with python_avatars pizzamanyoutube watcher ofall says:

    Good content keep up the awesome job

  23. Avataaar/Circle Created with python_avatars Build Break Repeat says:

    The rally kart is finally back!
    Stay tuned for next weeks video where we dyno the turbo kart and make some power!

Leave a Reply

Your email address will not be published. Required fields are marked *