In this video we drive the 60's turbo go kart for the first time! This thing is powered by a turbocharged predator 212 engine. What we needed to do was make a turbo manifold for the turbo predator 212, oil system, and electrical system to make sure the turbo could run completely autonomously, that way when we hook it up to the engine, we would know that there were no issues on the turbo side of things. After we did that we ran this turbo kart under boost with 2 carburetors, made custom intake piping, and finally revved it up and tuned it so it ripped! Then, a few weeks later we decided to change things up and use a single blow-through carb design with a pressurized fuel system and a 22mm mikuni.
Thanks for watching and be sure to stay tuned for this thing making some boost while driving!
**Be sure to check your local laws before driving any non-registered motorized vehicle. Do not attempt these activities at home. All content produced by Build Break Repeat is for entertainment purposes only.**
BBR EXTRA CHANNEL!
https://www.youtube.com/channel/UCloBxviTbFYgsM2Rh6QLi_w
Music by Joakim Karud http://youtube.com/joakimkarud
https://bandcamp.com/download?id=3635175367&ts=1515906951.1490003405&tsig=a6d42a087ba6c6a743af77e5e10da1df&type=track
PARTS-
Mikuni Carb - https://www.gopowersports.com/22mm-mikuni-carburetor-performance-kit/?utm_campaign=Build_Break_Repeat&utm_source=YOUTUBE&utm_medium=Video
18 pound valve springs - https://www.gopowersports.com/18lb-valve-springs/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Exhaust and Air Filter -http://www.gopowersports.com/deluxe-predator-performance-kit/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Tires - http://www.gopowersports.com/410-x-3-50-5-slick-tire/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Inner Tubes - http://www.gopowersports.com/410-5-tube-90-degree-valve-stem/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Motor Kit - http://www.gopowersports.com/6-5-hp-212cc-predator-engine-with-clutch-and-chain/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Catch can - https://www.gopowersports.com/aluminum-catch-tank/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Header pipe:
https://www.gopowersports.com/header-pipe-build-your-own/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Mechanical Fuel Injection:
https://www.gopowersports.com/tillotson-tct-mechanical-fuel-injection-carburetor-replacement/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
BRAND NEW BBR MERCHANDISE
https://www.etsy.com/shop/BuildBreakRepeat
^^^^^^Click this link to check out our awesome new merchandise!
Thanks for watching and be sure to stay tuned for this thing making some boost while driving!
**Be sure to check your local laws before driving any non-registered motorized vehicle. Do not attempt these activities at home. All content produced by Build Break Repeat is for entertainment purposes only.**
BBR EXTRA CHANNEL!
https://www.youtube.com/channel/UCloBxviTbFYgsM2Rh6QLi_w
Music by Joakim Karud http://youtube.com/joakimkarud
https://bandcamp.com/download?id=3635175367&ts=1515906951.1490003405&tsig=a6d42a087ba6c6a743af77e5e10da1df&type=track
PARTS-
Mikuni Carb - https://www.gopowersports.com/22mm-mikuni-carburetor-performance-kit/?utm_campaign=Build_Break_Repeat&utm_source=YOUTUBE&utm_medium=Video
18 pound valve springs - https://www.gopowersports.com/18lb-valve-springs/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Exhaust and Air Filter -http://www.gopowersports.com/deluxe-predator-performance-kit/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Tires - http://www.gopowersports.com/410-x-3-50-5-slick-tire/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Inner Tubes - http://www.gopowersports.com/410-5-tube-90-degree-valve-stem/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Motor Kit - http://www.gopowersports.com/6-5-hp-212cc-predator-engine-with-clutch-and-chain/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Catch can - https://www.gopowersports.com/aluminum-catch-tank/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Header pipe:
https://www.gopowersports.com/header-pipe-build-your-own/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Mechanical Fuel Injection:
https://www.gopowersports.com/tillotson-tct-mechanical-fuel-injection-carburetor-replacement/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
BRAND NEW BBR MERCHANDISE
https://www.etsy.com/shop/BuildBreakRepeat
^^^^^^Click this link to check out our awesome new merchandise!
Throw a nitrous kit on that bitch will solve the lag at mid range it'll just be full power off the line lol
Slow af
I think you should try forcing more air into the turbo with a directional piping system taking air in at the front of the kart
When will there be a mini V8 build?
add nitromethane mix it wih gas but shake the shit up before filling it seperates, u will build boost because of the nitrogen content i did it on my predator.
You guys need to spray nos in the turbo
This is way cool but not what I expected. I would have thought you could like flore it and do durn outs
Why did you decide to not use a blow off valve?
Not to b e a Dick, the cart sounds terrible and I do not here boost on the engine.
By question is if the turbo that have on the motor was ment for a gas engine would it be better to run a turbo off of a diesel engine like a jetta or a beetle be cause they create less flow and heat but would allow the small gas engine to create more boost
The concrete road to nowhere. I would be there all the time. Set up a makeshift kart track. You have to be in Nevada right? (Edit) now that i look at the surroundings, the dirt and no mountain ranges i dont think Nevada. But maybe in the midwest somewhere. Could be Michigan because they use concrete alot.
Get an app for your cell phone for speed limit I'd like to know how fast you're going seems like a simple fix
Change down the jet 2 sizes.
it looks really slow a turbo will never work great even on a hopped up engine. smog pump supercharger would be better
Aye did y’all take the governor off it
just put a small fuel pump on it, naturally aspirated carburetors are not gonna cut it
EFI…
supercharging no lag amri 500cc with blow off valve varoom signing off DR.d. ps. not a real docter
@BBR a forged rod and a forged flywheel and removing the governor will make more power and high speeds with a smaller clutche and sproket f drift lol top speed and boost is what your after lololololol
Cool stuff, looks like a lot of fun! Thanks for the entertainment guys.
Sounds like ya need a fuel pressure regulator
Motomigs is about to show y’all how it’s done right
Pressure the tank..