In this video we completely build and rip a junkyard built 2 wheel drive mini bike. The build off took us 2 days of long nights and many hours searching around the Pate Swap Meet.
The idea of the build off was a weekend project where each team spent as little money as they could and used only parts they find at the swap meet to make the craziest and fastest mini bike they could think of. We thought the best way to do this was through an AWD mini bike setup, which turned out to completely rip and just destroy front tires and do crazy mini bike burn outs.
What we did was we found a frame for $60, 2 Briggs and Stratton Flat Head engines; one for $10 and a complete one for $50, some free parts, and a $30 wheel and hub assembly for the front wheel drive. After getting back to Go Power Sports we worked on mounting the front engine plate so we could test the idea. After that we test drove it as a front wheel drive mini bike and it was a ton of fun but we had some issues with the plate flexing and chain tensioning. After that we added the rear engine and some other cool things like a mikuni carb and a rear motorcycle fender then we headed over to the swap meet with CarsandCameras, Red Beards Garage, and Rather B Welding!
The "competition" was really fun and a ton of people were there to help and we really felt like a family with these guys.
Thanks for watching and be sure to subscribe to see this thing in the future!
MUSIC-
Intro Song: https://andrewapplepie.bandcamp.com/track/jimmi Time-lapse Song:https://andrewapplepie.bandcamp.com/track/the-sign
PARTS-
Clutch and Chain for both engines
http://www.gopowersports.com/12t-3-4-bore-clutch-and-chain-kit-35/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Mikuni
http://www.gopowersports.com/original-mikuni-vm22-133-carburetor/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Throttle Cables
http://www.gopowersports.com/44-throttle-cable/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Seat
http://www.gopowersports.com/12-mini-bike-seat/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Header Pipes
http://www.gopowersports.com/predator-performance-header-pipe/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Muffler
http://www.gopowersports.com/rlv-4104-1-5-16-exhaust-silencer-with-hd-ss-clamp/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Thank you GoPowerSports!
The idea of the build off was a weekend project where each team spent as little money as they could and used only parts they find at the swap meet to make the craziest and fastest mini bike they could think of. We thought the best way to do this was through an AWD mini bike setup, which turned out to completely rip and just destroy front tires and do crazy mini bike burn outs.
What we did was we found a frame for $60, 2 Briggs and Stratton Flat Head engines; one for $10 and a complete one for $50, some free parts, and a $30 wheel and hub assembly for the front wheel drive. After getting back to Go Power Sports we worked on mounting the front engine plate so we could test the idea. After that we test drove it as a front wheel drive mini bike and it was a ton of fun but we had some issues with the plate flexing and chain tensioning. After that we added the rear engine and some other cool things like a mikuni carb and a rear motorcycle fender then we headed over to the swap meet with CarsandCameras, Red Beards Garage, and Rather B Welding!
The "competition" was really fun and a ton of people were there to help and we really felt like a family with these guys.
Thanks for watching and be sure to subscribe to see this thing in the future!
MUSIC-
Intro Song: https://andrewapplepie.bandcamp.com/track/jimmi Time-lapse Song:https://andrewapplepie.bandcamp.com/track/the-sign
PARTS-
Clutch and Chain for both engines
http://www.gopowersports.com/12t-3-4-bore-clutch-and-chain-kit-35/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Mikuni
http://www.gopowersports.com/original-mikuni-vm22-133-carburetor/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Throttle Cables
http://www.gopowersports.com/44-throttle-cable/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Seat
http://www.gopowersports.com/12-mini-bike-seat/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Header Pipes
http://www.gopowersports.com/predator-performance-header-pipe/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Muffler
http://www.gopowersports.com/rlv-4104-1-5-16-exhaust-silencer-with-hd-ss-clamp/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Thank you GoPowerSports!
The flat take off burnout was crazy wicked cool
You guys should learn about Solex mopeds
may I suggest you center the engine so it's easier to support, and use a jack shaft to correct for the clutch offset.
Should try some hill climbing ..awesome video!
Is it possible to add a sprocket on a engine without welding?
"You better not weld an engine to the front of it you're gonna piss me off" 😂 that's great lol
Love that rattle flap on the exhaust.
you should try one of those Yanmar type Diesel engines
I think should be mandatory ya wear a helmet or don't ride..
I like the two independent engines on the motovox!
Now put 2 torque converters on it 😂😂😂
Flatheads are the best, I just rebuilt one and can’t wait to use it in something fun
good job did you look at a rokon to see how they connect their front wheel
eh. isnt it unbalanced now? weight distribution is off now… dont think you can take turns sharp.front weight gonna throw u off balance… couldn't you just but them both in the middle. some how link them together with gears and braces. theres another channel varsandcameras like urs that do karts and special builds. they have that build i think. seen it somewhere.
Dude I’m eleven and I know how to tick weld
Two gay guys on a minibike…that was weird…
If this video showed more of the other bikes it might be possible to give n opinion on the build off. This videos covers one bike.
I do like the double engine bike best. So, is it a twist grip throttle for one engine and a reversed brake pedal for the throttle on the second engine?
Or turn the clutch around and move the engine over 2 or 3 inches.
Why couldnt you mount the top clutch backwards to get the engine more centered on the front engine
call it the brain cell killer
Now put some paddle tires on that two wheel drive beast and try in the sand
Love the videos but please always use a chain guard especially on a front-wheel drive mini bike I've had a chain come off a go-kart and hit me in the throat because of the master link coming out hate to see that happen to you guys straight to the face be careful it happens!
Hey I'm curious why did you guys offset the motor why don't you just mount it directly in the center and then turn the wheel around
Oh hey I watched cars and cameras video first cos they’re my favourites and I love them and this video only just showed up even though I’m subbed. Also if you turned the clutch around you wouldn’t have had to offset the engine as much
670cc mini bike leave like if you agree
You guys are so awesome.I've liked every build,and look forward to Every vid you do.Thnx for sharing the fun.