In this video the rally kart gets fully assembled and ready to drive! It's a basic kart build but with the special intention to be developed as more of a "rally" kart. Meaning that it can have plenty of grip but also be capable of jumps, offroad, ect. What we needed to do to get it going was build the predator 212 engine with go power sports performance parts, attach the rear axle with new wheels and tires. Hook up the torque converter and chain, then finally work out the go kart throttle and brake and then this thing was ready to drive on some gravel roads!
We were really surprised by how well it preformed and how you could use the oversteer to accelerate out of corners! We are really happy with how this thing has turned out and we are looking forward to add some power upgrades as well as make this thing into more of a rally inspired go kart.
Thanks for watching and be sure to subscribe!
INTRO SONG: https://andrewapplepie.bandcamp.com/track/jimmi
PARTS-
-Springer Spindles- http://www.gopowersports.com/springer-spindles/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Tie Rods- http://www.gopowersports.com/tie-rod-generic-3-8/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Tires- http://www.gopowersports.com/13x500-6-slick-tire/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Sprocket Hub- http://www.gopowersports.com/1-sprocket-carrier-sprocket-hub/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Sprocket- http://www.gopowersports.com/manco-live-axle-sprockets-41-420-chain/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Rear Rims- http://www.gopowersports.com/one-piece-live-axle-wheel-for-6-tires-out-of-stock/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Locking Collars- http://www.gopowersports.com/axle-lock-collar-1/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Axle Hangers- http://www.gopowersports.com/3-hole-axle-bearing-kit/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Brakes-http://www.gopowersports.com/go-kart-mechanical-brake-disc-kit-9511-9598-th1000/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Live Axle Kit- http://www.gopowersports.com/live-axle-kit-complete-38-axle-6-live-axle-wheels-are-on-backorder-6-wheel-kits-will-not-ship-until-end-of-may/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Predator 212 Engine- http://www.gopowersports.com/6-5-hp-212cc-predator-engine/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-30 Series Torque Converter- http://www.gopowersports.com/tav-30-75-torq-a-verter-comet-after-market-replacement/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Valve Springs- http://www.gopowersports.com/18lb-valve-springs/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Performance Kit- http://www.gopowersports.com/stage-1-predator-performance-kit-for-196cc-212cc-engines/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
-Gussets- http://www.gopowersports.com/3-x-3-gusset/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video

BRAND NEW BBR MERCHANDISE

https://www.etsy.com/shop/BuildBreakRepeat
^^^^^^Click this link to check out our awesome new merchandise!

Avatar photo

By YTB

21 thoughts on “Assembly and first rip! rally kart build part 2”
  1. Avataaar/Circle Created with python_avatars Yz Rider says:

    Do y’all live in Texas ?

  2. Avataaar/Circle Created with python_avatars Coyote_450f says:

    whats the intro song called?

  3. Avataaar/Circle Created with python_avatars A retarded Person says:

    Is that the 60s go kart fram

  4. Avataaar/Circle Created with python_avatars Дмитрий Денисенко says:

    Hi! Very good! Молодцы!

  5. Avataaar/Circle Created with python_avatars Jay Williams says:

    What is the music for your intro

  6. Avataaar/Circle Created with python_avatars CriticalthinKing says:

    I'm thinking roll cage and seat belt or wheelchair?

  7. Avataaar/Circle Created with python_avatars ValleyPyro 209 says:

    Any tips on upgrading me gx270

  8. Avataaar/Circle Created with python_avatars Srdjan Krajcer says:

    You need off road suspension to build a real off road kart, and you should make some cover for the engine to protect it from the dirt, and also put bigger wheels amd tires if you can and pls change the steering whel to be a WHEEL not some kind of plane controller or whatever… This was only my advice, good luck

  9. Avataaar/Circle Created with python_avatars Aicha Sow says:

    Look awesome

  10. Avataaar/Circle Created with python_avatars jkhfgdkjhg;ojgvlkjg;ih says:

    What spray did you use to clean the engine?

  11. Avataaar/Circle Created with python_avatars The Commentor says:

    Motor seems sluggish. It needs a 450f or a 250 two stroke

  12. Avataaar/Circle Created with python_avatars sam says:

    Minnesota backroads?

  13. Avataaar/Circle Created with python_avatars RalphTheDog #1 says:

    Those logo shirts are so sick. You have a killer logo.

  14. Avataaar/Circle Created with python_avatars StarPuss says:

    Needz More Power!!!
    LOL!!!

  15. Avataaar/Circle Created with python_avatars kz6fittycent says:

    That thing is fast

  16. Avataaar/Circle Created with python_avatars Tim Bagshaw says:

    That thing RIPS it looks like SO MUCH FUN! You guys are awesome. Get out there and get your hands dirty building something. There is nothing quite like building your own toy and then bashing on it. Keep on keeping on!!!

  17. Avataaar/Circle Created with python_avatars Shark Bait says:

    Bad idea upgrading the valve springs on a otherwise stock predator w/ no governor. The stock flywheel and connecting rod are normally able to handle a governor removal, since the stock springs will float before any damage is done. But with those upgraded springs, you're going to need to upgrade the flywheel and rod – which is not cheap – or you could destroy that engine. Some people try to get around it by simply not going flat out, but not a lot of people have that much self control (I don't!). Just a heads up.

  18. Avataaar/Circle Created with python_avatars Nickelyoonthehop says:

    Another cool build. Love the videos guys! Just one question. Do they not sell sneakers and white sox in Texas? Lol

  19. Avataaar/Circle Created with python_avatars Andrew Halliday Music says:

    This needs some ATV suspension with serious travel hahah then it'll be rally like…you can jump and drift you can rally….this looks too rigid for rally theme

  20. Avataaar/Circle Created with python_avatars BryDuhBikeGuy says:

    Now yer laughin…

  21. Avataaar/Circle Created with python_avatars BryDuhBikeGuy says:

    Glad to see you're little testy's work well.

Leave a Reply

Your email address will not be published. Required fields are marked *