Well this video marks a pretty cool time for the FL250 odyssey restoration. After rebuilding the motor and touching every single bit of this thing's frame including each nut and bolt, it's finally time to let er' rip! The Honda FL250 odyssey was made for a long time and is known as a type of legend within the karting/utv community for its durability and 250cc 2-stroke madness. We were very excited to begin working on this thing and it has made a major transformation in terms of looks as well as driving capability. While it still drives a little rich, that can be tuned out with time so we are excited to see what this thing can really do when its perfectly set up.
Thank you guys for watching and be sure to stay tuned for the rest of this build!
**Be sure to check your local laws before driving any non-registered motorized vehicle. Do not attempt these activities at home. All content produced by Build Break Repeat is for entertainment purposes only.**
Intro Song
https://andrewapplepie.bandcamp.com/track/jimmi
PARTS
Seat Belt- http://www.gopowersports.com/blazer-5-point-seat-belt/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Gas Tank- http://www.gopowersports.com/large-fuel-tank-2-25-gallons/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Gussets - http://www.gopowersports.com/3-x-3-gusset/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Front Tires- https://www.gopowersports.com/20-x-7-8-small-v-tread-tire-7-020-050tm/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Rear Tires- https://www.gopowersports.com/22-x-11-8-knobby-tire
Snorkel Tubing- https://www.gopowersports.com/air-cleaner-duct/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Shocks- https://www.gopowersports.com/mini-rear-shock-please-read-description/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
GPS- http://www.gopowersports.com/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
BRAND NEW BBR MERCHANDISE
https://www.etsy.com/shop/BuildBreakRepeat
^^^^^^Click this link to check out our awesome new merchandise!
Thank you guys for watching and be sure to stay tuned for the rest of this build!
**Be sure to check your local laws before driving any non-registered motorized vehicle. Do not attempt these activities at home. All content produced by Build Break Repeat is for entertainment purposes only.**
Intro Song
https://andrewapplepie.bandcamp.com/track/jimmi
PARTS
Seat Belt- http://www.gopowersports.com/blazer-5-point-seat-belt/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Gas Tank- http://www.gopowersports.com/large-fuel-tank-2-25-gallons/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Gussets - http://www.gopowersports.com/3-x-3-gusset/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Front Tires- https://www.gopowersports.com/20-x-7-8-small-v-tread-tire-7-020-050tm/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Rear Tires- https://www.gopowersports.com/22-x-11-8-knobby-tire
Snorkel Tubing- https://www.gopowersports.com/air-cleaner-duct/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
Shocks- https://www.gopowersports.com/mini-rear-shock-please-read-description/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
GPS- http://www.gopowersports.com/?utm_source=YOUTUBE&utm_campaign=Build_Break_Repeat&utm_medium=Video
BRAND NEW BBR MERCHANDISE
https://www.etsy.com/shop/BuildBreakRepeat
^^^^^^Click this link to check out our awesome new merchandise!
Find a carb off the Honda 250R. Or, better yet, the whole 250R engine. Talk about wake that lil rig up.
Man, where do you guys find these farm roads… I am in the DFW area and cannot seem to find anywhere to stretch the legs on my toys without driving a couple of hours and paying to get in. Great vid, love the 2 stroke doing its thing.
My 212cc is kicking back really hard and I almost broke my fingers.I have a 26 mm carburetor 18lb springs and an arc flywheel. Please help I need to get my yerf dog fix and I need my fingers for work.
Looks like a lot of fun!
Air box holes need adjusting/construction then mess with air file mix
Awesome Guys.Sounds,and looks great ! Your work is paying off.Have to remind peeps you rebuilt the motor and it's still breaking in too.
A 2 stroke carb works backwards from a 4 stroke carb. Tightening the screw richens the mixture and loosening it will lean out the mixture. The screw adjusts air on a 2 stroke and fuel on a 4 stroke.
Your idle is set too high for the idle/air mixture screw to have any effect. Set the idle/air mixture screw to 1 & 1/2 turns out. Run a few high speed runs (wide open throttle), then shut the motor off while coasting to a stop. Don't let it idle. Pull your spark plug and check it's color. It should be a light brown on the porcelain part of the plug. If it's white and flakey, it's lean. If it's dark and/or oily, it's rich. Your idle/air mixture screw only affects 0 – 1/8 throttle. The needle jet in the slide affects 1/8 – 3/4 throttle (most effective jet). Your main jet affects 3/4 – full throttle. Good luck.
Ive heard the odyssey is good untill you get them in the water
The stock pipes are junk for the fl250, mine pulls power from the engine
What are you guys attending school for?
That thing looks like my friend used to have one he blew it up left it for three days and it got stolen ugh now I wish you still had it so we could be like you ha ha ha ha I love your vid's you guys are awesome
Widen the a arms and rear axle and add a 3 inch lift with bead lock atv tires.
It's so fucking loud!!
i had a '84, beat the crap out of it an it never broke or stopped!!!!!!! i ended up selling it for a lot more then i bought it when i had to move, wished i had never sold it an been looking for another one but no luck around here yet
Thank you build – break – repeat! The fun is in the journey indeed.
Hey guys awesome job on building that it absolutely looks awesome mix the gas at 32.1 4 ounces of oil per gallon omg stop turning that idle screw out she’s running soooooo lean I can’t hear it at idle, That screw is literally four 1/8 of the throttle keep it at 1 1/2 no more than 2 out. Keep up the good vids guys!!!!
Pipe might have been clogged.